Tag Archives: Tiles

Do It Yourself Floor Tiles

Are you interested in learning how to lay ceramic tiles yourself? This can give you satisfaction and pride in your own home. Ceramic tiles look especially nice in kitchens, where they add warmth to your kitchen décor. Professionals charge quite a bit for this service, whereas you can easily do it yourself if you are willing to learn. And if you find you really enjoy laying floor tiles, you might find yourself with a lucrative new career.

When laying ceramic tiles, safety is the most important concern. Never install floor tiles without wearing protective gear. You need safety goggles, leather gloves, and a long sleeved shirt. This is especially important if you are planning on removing old tiles, as you can seriously cut yourself on broken pieces.

You will need a fair number of tools in order to install ceramic tiles. You probably already own many of these tools, such as tape measures, carpenter’s squares, and bubble levels. You may have to buy or rent a tile cutter, and you will have to purchase tiling grout, sealant, and any other small tools you don’t own such as a notched trowel or a putty knife.

If you have never laid ceramic tiles before, you may not know where to begin. If there is already tiling on your floor, obviously you have to remove it. Put on your protective gear and use a flat-bladed chisel to break up the old tiles. When you are finished, make sure to clean up and dispose of all the debris.

Next, check your sub-flooring (the material exposed by removing the tiles). Concrete subfloors may contain cracks. If so, repair the cracks as best as you can. If a crack is too large or otherwise unrepairable, you will have to replace the concrete in that section of the floor. Plywood subfloors should be at least 1 and 1/8 inches thick in all places. If your sub-flooring is not prepared properly, your tiles will dislodge or break, so don’t rush through this step.

Now it’s time to measure your floor and start laying tile. Measure across the room and mark the center. Do the same thing in the other direction. Mark both measurements using chalk. This shows you where to lay your tile.

Your first tile is going to go in the center of the floor. Put it down and make sure it is exactly where you want it. Then, using a notched trowel, put tile adhesive or mortar onto the back of the tile. Attach it to the floor by pushing it down firmly and twisting until it no longer moves. If excess adhesive oozes out of the tile, use a damp sponge to clean it up.

Once you have placed all your tiles, all that’s left is to grout and seal the floor. There will be small gaps between your tiles; pour grout, or man-made cement, into these spaces, using a rubber grout float. Once it dries, put sealant over the grout, and your floor is done.

Annie is an expert furniture and interior design writer. Her current area of specialism is living room, sideboard and wooden garden furniture

Beautify Homes with Modern Floor Tiles

If one is planning to beautify a home’s interiors, painting walls with bright colors would not be enough. Impressive flooring is an essential to ensure that a room stands out. Therefore, to add to the aura of a room an interior designer or home owners needs to put in some extra hours to decide of the type and design of flooring. Tiles are not just a hard scratch resistant easy to clean surface but as they are available in a galaxy of designs, patterns and colors, they add to the artistry of a room, making it a very popular home décor surface material.

Choosing perfect tiles

Tiles are available in a variety of materials. Therefore, when choosing tiles, one need to have a basic idea of tiles’ materials, this is important in determining the tile type to be used in specific places. Wall and floor tiles for bathroom are different from floor and wall tiles for kitchen or cheap outdoor tiles’ material vary from the indoor tile material.

However, if one doesn’t have a good tiling knowledge, one need not worry as there are commercial tiling services companies in Brisbane, Australia, who not only offer customers a galaxy of Modern Design Tiles but also guide them in choosing the right type of tile for right usage or the right place for usage.

The best part is that these companies also have a highly skilled team of tillers who share a passion and flair for converting dreams into reality by flawless fixing of tiles in floors, bathrooms, kitchen, outdoors or in the wall. These companies have therefore been a very important partner in making beautifully decorated homes across Queensland, Australia for providing wall and floor tiles solution.

Different types of tiles

Most of the commercial tiling services companies in Brisbane, Australia offer four main types of tiles. They are –

* Ceramic Tile – Ceramic tile is most common type of tiles, used for coving both floors and walls. These are the best bathroom tiles choice often used for custom bathroom renovations. These types of tiles are porous and delicate and perfect for indoor purposes that help to enhance the interior of a room. Again Ceramic tiles are available in two kinds, i.e., unglazed and glazed.

* Porcelain tiles – Porcelain tiles are a type of ceramic tiles only they are harder then ceramic ones. These tiles are practically impermeable to water with most being frost resistant and hence used both indoors and outdoors.

* Natural stone tiles: This is a highly wide category that consists of stones such as marble, travertine, granite, slate and limestone. These are generally permeable and require prior polish before usage. Natural stones can add a dash of luxury to any property and therefore, customers looking for something unusually gorgeous can use these stones. Some of most of the tiling services companies also have tillers who are experts in polishing natural stones.

* Mosaic tiles – Mosaic come in varieties of glass, ceramic, and natural stone. Mosaics are made of unusual materials like stainless steel and real sea shell. They also are available in different shapes like hexagons or octagons among other unique shapes.

Louise is based in Brisbane, Queensland, Australia. He is an architect by profession and visit commercial tiling services company to check to keep himself updated. He loves home décor materials and loves to write on this topic.

Ceramic Tiles In The Bathroom – More Than Just Floors

Ceramic tile flooring in bathrooms is quite common due to its toughness, attractiveness and its ability to cleaned easily. Ceramic tile flooring for bathrooms is definitely the fist choice for a large number of homeowners when they decide to remodel their bathrooms. However, flooring is not the only way ceramic tile can be put to great use in a bathroom especially when planning a bathroom remodeling makeover.

Putting ceramic tiles on the walls of a bathroom is also another common way to add design to your bathroom. You really have the ability to let your imagination take over and set the decor for the entire room. There is an array of ceramic tile options available. You can find ceramic tiles in so many shapes, sizes, colors, textures and patterns that the task in finding the style can be overwhelming at first.

A ceramic tile design that is both very popular and very effective is when small accent ceramic tile pieces are used in conjunction with large ceramic tile pieces. The small accent ceramic tile pieces can be used as a border or as an overall theme within the floor, a style that you just can’t get by using paint or wallpaper. Also, ceramic tile flooring comes in a large range of designs, everything from classic elegance to edgier modern styles, and they also come in a range of prices in order to fit any budget.

As ceramic tile manufacturing and design processes have evolved over the years one can even now find ceramic tile for use in the bathroom, the kitchen and beyond that really doesn’t look like ceramic tile at all (but has all the same wonderful properties). From ceramic tiling that mimics the appearance of wood to tiles that have a metallic appearance that can be used to create a truly unique and sophisticated atmosphere in any room , these are certainly a far cry from the ceramic tiles of days gone by.

If you want to create a great looking bathroom that is easy to clean and has great style a ceramic tile bathroom may be the best choice for you.

Want to find out more about ceramic tile floors #1, then visit Carrell Rogers Carpet One’s site on how to choose the best ceramic tile flooring #2 for your needs.

The Best Way For Cleaning Ceramic Tiles And Grout

With ceramic tiles making your floors, you have to be very careful while cleaning them. Use of improper cleaning agents and detergents can spoil the looks of tiles for ever. It would be a shame to lose that beautiful shine you got when the tiles were new. Unless you are very sure of the cleaning material, don’t use the same for cleaning your tiles. There are a few methods you can use to clean them without harm. You could either rent an electric floor cleaning machine or buy one ready to use tile cleaning solution form a hardware store around the corner.

Electric floor washers offer the most practical option as they are convenient to use and work fast to give good results. The outcome of using an electric floor machine is still better if you have a machine that polishes the floor after having washed the same. Use of these machines ensures safety of your tiles and they begin to sparkle This machine will not damage or scratch your floor in any way. You can even purchase your own machine for regular use.

If you are not up to bringing a heavy duty machine into your home just to clean the kitchen then the method you can stick with is to use the right ceramic floor tile solution. Most people with smaller homes do it this way. They realize that this practice is economical, convenient and keeps away the hassles of using a floor machine. Particularly, the home owners with very small number of ceramic tiles at home find it to be very practical way of keeping the floors clean. Bear in mind that application of a wrong solution can make your ceramic tiles acquire dull looks, thus you have to be careful at the time of purchase.

For those who need a quick solution and can not get out and purchase something special there is a way to clean your tiles with soaps you have at home. All you have to do is mix some chlorine bleach with water and a little liquid dish soap. Some recommend the use of ammonia rather than bleach as the former is considered safer. Both ways work fine to clean, disinfect and preserve ceramic tiles.

Any of these methods will be safe, it all depends on your budget and what you prefer. The most practical and economical way to maintain you ceramic tiles would be to use home made solution more often but use special cleaners once a month and occasionally use a rented floor washing machine with the facility of polishing.

You can find a lot more tips and tricks on cleaning tile floors, then visit Miriam Faulkner’s site and get a peek on how to seal grout if you like.

Floor tiles installation tips

To tile a vast floor space, for example, a culinary specialist’s style kitchen floor-you require however many tips and pointers as could be expected under the circumstances to guarantee a consistent, eye-getting result. Take heart and read on, on the grounds that what according to the tile stores in Las Vegas takes after are some convenient tips for the whole floor tiling procedure. In the first place thing’s to begin with, in the event that you are utilizing fired tiles, the floor must have a smooth or inflexible surface, in which case, you may need to first lay plywood or other subfloor material. Along these lines, the tile underpins the establishment process and opposes breaking and twisting.

1. Initially, check rules on the subfloor and do a “dry keep running,” amid which you lay the tiles without glues to perceive how they lay and fit. For square rooms, locate the focal point of the room and check the rules from every divider. For rooms of whatever other shape, utilize a chalk line to snap a marker opposite to the primary access to the room. You will begin laying full tiles at the passageway on the grounds that an unmistakable full line of tiles welcome visitors is desirable over pieces and offers a more adjusted visual.

2. From the passageway to the most remote divider, lay tiles along the line you snapped. Ensure the tiles adjoin to each other, or utilize a spacer to guarantee equivalent separation between tiles.

3. When you achieve the end of the room and there is no more space for a full tile, separate the remaining space with a bit of wood or other marker. Tack this into spot and keep on drying lay tiles in both bearings to the dividers on every side of the room, making a “T” shape with the tiles. Stay one tile far from every divider or hindrance.

4. For equivalent measured fringe tiles, decide the amount of space you have left over toward the end of every tile line, and move the tiles you laid to ensure that the remaining space is equivalent on both sides of the room. Snap a second line taking into account this estimation in one corner, and where this line meets with the wood or other marker is your new beginning stage. The main line is no more required, so the dry-set tiles can be evacuated for the occasion.

On the off chance that you take after these strides and set aside an ideal opportunity to do it right the first run through as per tile flooring in Henderson, even another do-it-without anyone else’s help era can deliver a quality and solid tile floor. Continuously wear eye security goggles, and utilize alert when working with force cutting devices. Notwithstanding for a learner, a story retiling undertaking ought to take close to 10 hours, so in a solitary day, on the off chance that you have every one of the devices and tile material within reach, you can totally and effortlessly change your kitchen.

Joseph Roy is the author of this article. To know more information about tile stores in Las Vegas please visit the website.

Italian porcelain floor tiles sound very high class

Some things automatically sound posh and bring to mind high class hotels or drawing rooms in manor homes. The words Italian porcelain floor tiles fall into this category along with grey polished porcelain tiles and decorative Italian porcelain tiles.

Porcelain

It is a myth that all porcelain tiles are “through” coloured products. Actually, only “unglazed” porcelain tiles are through-coloured, meaning that if the tile is chipped, the colour showing beneath the top layer will be the same throughout the thickness of the tile. Once a tile has been glazed, whether ceramic or porcelain, the body under the glaze will never be exactly the same colour or texture as the top layer. This is an important consideration when choosing the tile that is right for your space. When picking porcelain tile, it is best to choose one that has “through body colour.” Some tiles may have only a ceramic glaze fired over the body; if chipped, the white-, tan-, or red-clay base is exposed.

Porcelain tile is actually a form of ceramic tile, but made from much finer clay than ceramic, composing kaolinite minerals, quartz and feldspar, covered by spray and shaped by dry pressing the clay dust to form a ceramic material that is then fired at higher temperatures than ceramic. One of porcelain’s most important characteristics is its resistance to moisture. It is also resistant to wear, deep abrasion and frost, making large porcelain tiles a great product for use in harsh climates.

In general, porcelain tile is harder than ceramic and offers greater design flexibility. Although both are made from clay and other naturally occurring materials fired in a kiln, the clay used to make porcelain tile is more refined and purified. It’s fired at a higher temperature and greater pressure, resulting in an extremely dense and hard material.

Porcelain can also be rectified — cut to a precise size so all tiles are identical, allowing the tile contractor to set extremely tight grout joints. Certain factors make installing porcelain tile a more difficult do-it-yourself project. Its density and hardness require a wet saw with a porcelain diamond blade. For proper surface adhesion, you should use a latex modified thinset mortar.

For safety in wet areas or in flooring applications where accessibility is a concern, look for a tile — whether porcelain or ceramic — with a high coefficient of friction. This property is measured on a 1 to10 scale, with 10 being the most slip-resistant. This is even more important when you are considering flooring in areas such as the bathroom where small children or elderly people are likely to slip.

Black porcelain tiles are amongst the commonly used tiles which are to be found in both homes and commercial areas. They look good and are also easy to maintain and they do not need to be expensive in order to look attractive. Italian porcelain floor tiles may sound like a fancy term for something which is upper class and posh but in truth they are very affordable and quite commonplace these days.

Peter Swain reviews about Italian porcelain floor tiles and says that When it comes to choose Floor Tiles, Kitchen Tiles, Wall Tiles or any kind of Bathroom Tiles Stonetrader.co.uk Will be your Right Choice.

How Are Porcelain and Ceramic Tiles Different?

If you are planning to re-tile a bathroom or kitchen then one of the main factors affecting which tiles you choose is how they look; are they the right colour, texture and size to create the look and feel that you are after? And, of course, do they fit with your budget as well as your design ideas?

But there is more to a wall or floor tile than how they look and feel; no matter how beautiful a tile might appear it will not be suitable if it doesn’t meet the requirements of your installation. For example, if you plan to use floor tiles in a wet-room are they slip resistant? Safety should always be a consideration when tiling a floor.

So it is worth checking out the technical information available with the tiles; it is not just boring details that are of no concern to you this stuff will help you make a choice that proves to be safe and durable enough for a particular environment as well as one that looks great.

Firstly, what are the tiles made of? It is not uncommon for consumers to refer to all wall and floor tiles that are not made from natural stone as “ceramic”. And whilst, technically, this may be true there is a big difference between the manufacturing processes for traditional ceramic tiles and the more technologically advanced processes for making porcelain tiles.

There is confusion with the terminology because both types of tile are made from clay or from a clay mixture but that is where the similarity ends because the different manufacturing processes produce a quite different end product. There is a marked difference between how much stronger, more hard-wearing and more frost resistant a porcelain tile is compared to a ceramic tile.

To produce a ceramic tile the mixture of clay and water is shaped into a tile, which is then fired in a kiln. A glaze is then applied to the surface to produce the desired colour. Whilst not as strong or hard-wearing as porcelain tiles they are still perfectly suited to domestic installations and particularly for tiling walls.

Porcelain tiles on the other had are produced by mixing the clay with coloured minerals and finely milling it. The shaped tile is then created by pressing the mixture into moulds under high pressure. The kiln firing is then done at an extremely high temperature and this process results in a dense and very strong tile. Some porcelain tiles are glazed in the same way as ceramic tiles but many are now “full-bodied” which means they have the colour and pattern running throughout the tile rather than just as a surface layer on top. The advantage of a full bodied tile is that any chips or damage to the tile will be less noticeable because the chip will not reveal a clay coloured base layer. But even glazed porcelain tiles are much more durable than their ceramic cousins.

Another advantage of using porcelain tiles in the home is that they are also highly waterproof so are perfect for today’s modern wet-room style bathrooms. The fact that they are waterproof also means that they are highly frost-resistant so some types are suitable for outdoor use; but do check this with the supplier as some types are not. Most porcelain tiles will be graded for the most suitable type of use so make sure to check the PEI rating on any tiles you are considering buying: 0 means they are the most fragile and only suitable as wall tiles and 5 means they are suitable as floor tiles in both residential and commercial settings.

The author has written and published articles on a wide range of topics including Contemporary Art, Interior Design, Home Renovation and advice on choosing floor tiles and wall tiles. She is passionate about promoting the responsible and ethical use of the great resource that is the Internet.

Ceramic Tiles To Beautify Your Home Or Office

If you want to beautify your home or workplace, ceramic tiles is one of the best options. In other words, it is suitable for all types of applications, ranging from residential to commercial purposes.

Ceramic tiles are perhaps the most durable flooring option now available on the market. A ceramic tile is simply a mixture of natural clays that have been molded and fired at high temperature. Sometimes, it is made out of such recycled materials as auto windshields, old florescent bulbs, and ground glass.

It offers many advantages over other flooring options like marble and wood, which include durability, resistance to fire and moisture, resistance to tread wear and abrasion, resistance to frost, easy maintenance, slip resistance, thermal shock and stain resistance, and color permanence.

Above all, they are easy to clean and provide an upscale look to your living space and work place.

Ceramics have been used from centuries by people of different culture and region to embellish in it beautiful works of art. Depending upon the texture, color, design, and pattern, different types are now available in the market.

Ceramics may be either glazed or unglazed, or porous or waterproof. Glazed types are mostly machine made, and are pressed in a die as well as fired in a kiln, which in turn provides hard surface and color to the product. Among unglazed ceramics are quarry tiles and en caustic tiles. Noted for its durability and versatility, porcelain is another popular type of ceramic. Saltillos are available in two varieties: machine-made and handmade.

Based on the specific purposes, ceramic tiles are further classified into floor products and wall products. As the name indicates, the floor type is a great option to surface floors. Produced using methods like bicottura and monocottura, floor tiles are mostly porcelain, and are more durable.

Further, they are categorized into several classes. For instance, class 2 floor tiles are best for high traffic areas such as kitchens and laundry rooms. Class 3 can be used for any home installation. Likewise, class 4 are recommended for small as well as medium commercial applications, whereas class 5 is usually recommended for such areas as shopping malls and restaurants. There are also products in order to apply exclusively in areas like gardens and swimming pools.

Grouped under class 1, ceramic wall tiles are considered a perfect choice for counter top and wall applications. Compared to the floor type, they are less durable and are more prone to slippery, since they are glazed with a matte or semi-gloss surface. Apart from its usage in kitchens, fireplaces, and rooms, they are also widely applied outdoors.

One of the recent additions are designer tiles as well as decorative ceramics. Hand painted products are of special demand nowadays. Luster painting, transfer painting, and carving are the other popular methods for designing ceramic tiles. Almost all designs that are imaginable are now depicted.

But, all-time favorite designs are those of flowers, vines, leaves, and seashells. Sometimes they are inlaid with white pipe clay or mosaic, which makes it stand out from other designs. However, most popular are those containing traditional designs. For instance, ceramic tiles graced with Asian mythological figurines are really sought-after. In addition to designs, colors also play a dominant role in providing aesthetic look.

From the aforesaid discussion, it is evident that ceramic tiles arrive in a myriad of size, shape, pattern, design, and color. Hence, prior to tiling it must be ensured whether tiles you have chosen are suitable for your space.

Size is another thing to be considered. If your room or office is small, it would be better to apply small tiles. Also, while selecting a tile, check whether its texture goes with your room theme. Likewise, during installation process, use such a grout that complements your tile.

It must also be checked whether products you have selected are easy to clean as well as maintain. In addition, as some are prone to slippery, it may turn dangerous during winter months. Hence, it must be checked.

Maverand offers the largest variety of ceramic tile, marble and granite mosaic and garden decorations . All products are carefully selected and come from the most qualified factories in Hong Kong and China.

Ceramic tiles, porcelain tiles and mosaic tiles, a great choice for wall and floor surfaces

Ceramic tiles are basically clay tiles which have been cast into tile forms and baked in batch inside of a kiln, where heat solidifies the clay once and for all. Makers use a glaze on the tile that can help to protect it from water and scrapes, then they fire the clay inside of a kiln to firm it.

Ceramic tiles are a extremely popular floor covering, and a lot of home owners opt for the ceramic tiles to put in within their bathrooms and kitchens.

Ceramic tiles are especially ideal for underfloor heatings because of their capability to store and conduct heat. The even heat distribution helps you to save on heating fees and as a result of a decreased air flow, significantly less dust is risen.

Ceramic tiles have been created for thousands of years to embellish the floors, walls, as well as ceilings of important constructions, from temples to pyramids. Ceramic tiles have got a sealed surface area fired at high temperature ranges.

General contractors use ceramic tiles on construction projects that stipulate a floor covering surface which is long lasting and durable.

Inside, home owners can make use of ceramic tiles and vitrified tiles for the exact same purposes, just like flooring and counter surfaces. Outside the house, on the other hand, water will become a key element in cold environments, due to the fact only a bit of moisture content can freeze during winter months and fracture the tile.

Any glazed or unglazed ceramic tile that soaks up more than 3% moisture content is inappropriate for external use in environments wherever freezing conditions can happen.

You are able to use these ceramic tiles for your back splash, counter tops, bathrooms, and so forth. If you would like to enhance your home attractively, here you’ve got a great deal of ceramic tiles which have fantastic colours and finishes; here you can get ceramic tiles that has a bright, washed, matte and non slip surface area.

Stone tiles for example polished travertine, granite, and marble can be incredibly slippery when the are wet. Ceramic tiles to be used in wet areas can be produced a lot more slip resistant either by making use of really small tiles in order for the grout lines serves as grooves or by imprinting a contour pattern on the face of your tile.

Ceramic and porcelain generally have several all round colourings and designs. Even though ceramic may very well be glazed to make different surface area colours or styles, porcelain is generally kept unglazed.

Ceramic tiles can be used to just about any surface area, such as either painted and incomplete drywall. They are able to make just about any space look good. They’re not going to burn up or feed to a fire in the slightest. They can be undoubtedly the easiest way to cover the wall surfaces and floor surfaces of any bathroom. Ceramic tiles could be installed by a skilled do-it-yourselfer.

To find out more about all our range of tiles whether they be ceramic, porcelain, mosaic or any of our types, please go to john

Different types of floor tiles.

Floor tiles come in many different materials, styles and colours and there will almost certainly be a tile to suit your requirements. There are however certain Tiles that are not suitable as floor tiles and in this article I will explain the suitable choices for floor tiles and then the choice is simply yours.

Floor tiles should always suit your existing decor and before you start the task of looking for floor tiles, take a moment to evaluate the existing decor and work with what you have already. The job you are carrying out may be a complete overall and you may be replacing all of the kitchen units, surfaces e.t.c  and in this case, the sky is the limit and you can plan your decoration as a whole but if you are just replacing floor tiles only, you will need to pay extra attention to your existing decor to make sure it all coordinates.

Natural stone tiles are extremely popular and are great for busy areas, they are strong, durable and come in a wide variety of colours and shades. Natural stone tiles come in different materials, those being, Granite, travertine, slate and marble.  Granite tiles are practical, durable and one of the most popular natural stone tile flooring options. Marble is considered the more expensive natural tile and is most popular for it’s chic and the wonderful variations pf colours available. Marble stone flooring is less durable than other natural stone and is more prone to scratching and marking and needs extra maintenance when cleaning.  Travertine tile again is durable and comes in wonderful shades of neutral colours, however travertine is more susceptible to staining and care needs to be taken when cleaning travertine. Lastly slate flooring is also a popular choice because it is strong, durable and waterproof. Slate tile flooring also comes in a wide range of colours, styles and sizes. The darker shades of slate are what attract home owners because they are less likely to show up stains and marks.

Ceramic and porcelain tiles are also firm favourites for the floor and both come in a wide variety of colours and styles. There are different types of ceramic and porcelain tiles and it is important to obtain the correct one which is suitable for flooring. All good tile stores and manufacturers will be able to select the correct tile for flooring options.  Floor tiles installed correctly and treated appropriately will certainly last the test of time and in areas of high traffic this is vitally important.

Tile choice offer a wide variety of Tile choice for the walls and floors, we also supply underfloor heating systems. http://wwwtilechoice.co.uk